Vibiemme Lollo coffee machine Steam & Water Tap Lever – Complete Assembly (ASSRACCRUBLOLLO)

Vibiemme Lollo Steam & Water Tap Lever – Complete Assembly

Complete replacement steam and water tap lever assembly for the Vibiemme (VBM) Lollo espresso machine. VBM part number ASSRACCRUBLOLLO. This is the full tap assembly — lever, body, and internal seals — providing a complete like-for-like replacement when the steam tip or lever is leaking water.

Compatible Models

Part Details

• Brand: Vibiemme (VBM)
• Part Number: ASSRACCRUBLOLLO
• Type: Steam and water tap lever – complete assembly
• Weight: 0.2 kg

VBM Lollo Leaking from the Steam Tap? A Short Maintenance Guide

A steam or water leak from the tap area on a Vibiemme Lollo is one of the most common service faults on this machine. Here’s how to diagnose the source and what’s involved in replacing the tap assembly.

Where Is the Leak Coming From?

Before replacing the tap assembly, confirm where the leak is originating. On the Vibiemme Lollo, water can escape from two common points:

• From the steam tip — a slow drip from the end of the steam wand when the tap is closed indicates the internal seal or valve seat inside the tap body has worn and is no longer sealing correctly.
• From around the lever or tap body — water weeping from the base of the lever or around the tap body fitting points to a failed O-ring or stem seal within the assembly.

In both cases, replacing the complete tap assembly (ASSRACCRUBLOLLO) is the recommended fix, as individual internal seals for this assembly are often unavailable separately.

How to Replace the Steam Tap on a Vibiemme Lollo

This repair requires depressurising and partially draining the boiler before the tap can be safely removed. The general process is:

1. Isolate the machine from mains power and allow it to cool completely.
2. Release steam pressure by carefully opening the steam tap until no more steam or water flows.
3. Drain sufficient water from the boiler to bring the water level below the tap fitting.
4. Unscrew the tap assembly nut from the boiler fitting — use a correctly sized spanner on the flat of the tap body, not on the lever.
5. Remove the old assembly and install the new ASSRACCRUBLOLLO, applying PTFE tape to the boiler thread if required.
6. Refill, pressurise, and check for leaks before returning to service.

This repair is recommended for a qualified technician or an experienced DIY repairer comfortable working on pressurised boiler systems.

Frequently Asked Questions

Can I just replace the O-rings instead of the whole tap assembly?

Possibly, if the correct seal kit is available for the Lollo tap. However, sourcing individual seals for this assembly can be difficult, and the cost difference between a seal kit and a complete assembly is often minimal. Replacing the full assembly ensures a reliable, long-lasting repair.

Will this tap assembly fit other Vibiemme models?

Part ASSRACCRUBLOLLO is listed specifically for the Vibiemme Lollo. Other VBM models may use different tap assemblies. Contact Bear Coffee Machine to confirm compatibility with your machine before ordering.

Do you ship Australia-wide?

Yes. Bear Coffee Machine ships to all Australian states and territories with fast dispatch.