San Remo Cafe Racer Front Boiler Heating Element 800W 230V

San Remo Cafe Racer Front Boiler Heating Element – 800W 230V

This is an OEM-specification replacement front boiler heating element for the San Remo Cafe Racer and Opera 2.0 espresso machines. The front boiler heating element maintains the brew water temperature in the dedicated brew boiler — a failed element will result in inability to reach or hold brew temperature, leading to under-extracted espresso and inconsistent shot quality.

Technical Specifications

• Power: 800W
• Voltage: 230V
• Boiler position: Front (brew boiler)
• Weight: 300g

Compatible San Remo Espresso Machine Models

This heating element is compatible with the following San Remo machines:

• San Remo Cafe Racer: All variants from 2017-05 through 2023-03
• San Remo Opera 2.0: All variants from 2017 through 2024-08

Check your machine’s serial number plate (usually on the base or rear panel) to confirm your production date. If unsure, contact our technicians before ordering.

When Should You Replace the Front Boiler Heating Element?

Replace this element if your San Remo Cafe Racer or Opera 2.0 is showing any of the following symptoms: brew temperature is consistently low or unstable, the machine takes much longer than usual to reach brew temperature, the machine trips the circuit breaker during heat-up, or a continuity test on the element terminals shows an open circuit.

How to Replace the Heating Element

Heating element replacement requires fully isolating the machine from power and water, draining the brew boiler, disconnecting the electrical terminals, and unthreading the element from the boiler body. Always verify the replacement element wattage and voltage match the original before installation. If you are not confident working with boiler internals, Bear Coffee Machine offers professional in-house servicing — contact us to book.

Frequently Asked Questions

Is this compatible with both the Cafe Racer and Opera 2.0? Yes — this element fits both the San Remo Cafe Racer and Opera 2.0 across the production date ranges listed above.

How do I test if the heating element has failed? Use a multimeter to test continuity across the element terminals with the machine isolated from power. An open circuit (no continuity) confirms the element has failed and requires replacement.

Can Bear Coffee Machine replace this element for me? Yes — we offer in-house repair and servicing for San Remo machines. Contact us to arrange a booking.