• Rocket Espresso boiler pressure gauge 0–3 bar Type V, white face, 57mm frame, part A299904632 — fits Giotto Cronometro V, Mozzafiato Evoluzione V & Porta Via
1 1

Rocket

Rocket Espresso Boiler Pressure Gauge 0-3 Bar Type V – White (Part A299904632)

Rocket Espresso Boiler Pressure Gauge 0-3 Bar Type V – White (Part A299904632)

$89.00 AUD
$89.00 AUD
Sale Sold out
Shipping calculated at checkout.

In stock

What Is This Pressure Gauge?

This is a genuine replacement boiler steam pressure gauge for Rocket Espresso Type V machines. Part number A299904632, this white-faced gauge displays boiler pressure on a single 0–3 bar scale, allowing you to monitor steam pressure during operation. It is a direct OEM replacement for the models listed below.

Compatible Rocket Espresso Models

  • Rocket Giotto Cronometro V (from August 2019)
  • Rocket Mozzafiato Evoluzione V
  • Rocket Mozzafiato Cronometro V (from August 2019)
  • Rocket Mozzafiato Cronometro V (from March 2023)
  • Rocket Porta Via (from August 2020)

Specifications

  • Part number: A299904632
  • Scale: Single scale, 0–3 bar
  • Gauge connection: 1/4" male (BSP)
  • Bulb connection: 1/8" female (BSP)
  • Frame diameter: 57mm
  • Body diameter: 52mm
  • Face colour: White
  • Type: V (PID-type V)

Symptoms of a Faulty Boiler Pressure Gauge

  • Gauge needle stuck, not moving, or reading zero despite the machine being at temperature
  • Gauge reading erratically or fluctuating wildly
  • Visible moisture, fogging, or condensation inside the gauge face
  • Gauge leaking from the connection point
  • Cracked or broken gauge face

How to Replace a Boiler Pressure Gauge

  1. Turn off and unplug the machine; allow it to cool and fully depressurise
  2. Remove the machine casing to access the boiler and gauge fitting
  3. Unscrew the old gauge from the 1/4" BSP boiler connection
  4. Apply PTFE thread tape to the new gauge’s 1/4" fitting
  5. Thread in the replacement gauge and tighten firmly — do not overtighten
  6. Reassemble the casing, power on, and verify the gauge reads correctly at operating pressure (typically 1.0–1.2 bar for steam boilers)

Tip: Always confirm your machine’s production date when ordering — Rocket updated the Type V gauge fitment from August 2019 onwards.

Why Buy From Bear Coffee Machine?

  • Genuine Rocket Espresso OEM parts — not aftermarket substitutes
  • Fast shipping from Sydney, Australia
  • Expert support — we can confirm compatibility using your machine’s serial number
View full details