ECM and Profitec E61 Group Head Service Kit – Cup Shower, 8.5mm Silicone Seal and Paper Spacer

ECM and Profitec E61 Group Head Service Kit – Cup Shower, 8.5mm Silicone Seal and Paper Spacer

Service your ECM or Profitec E61 group head with this genuine OEM kit. Includes the E61 cup shower screen, an 8.5mm silicone group seal (73 x 57 x 8.5mm), and a 0.5mm paper spacer — everything needed to restore a watertight group head seal and consistent extraction.

Kit Contents

• E61 Cup Shower Screen x1
• E61 Silicone Group Seal – 73 x 57 x 8.5mm x1
• 0.5mm Paper Spacer x1

Specifications

• Seal Type: Silicone (8.5mm)
• Seal Dimensions: 73 x 57 x 8.5mm
• Spacer: 0.5mm paper spacer
• Group Type: E61
• Compatible Brands: ECM, Profitec
• Weight: 0.2 kg
• Condition: New / Genuine OEM
• Vendor: ECM / Profitec

Compatible Models

• ECM Mechanika (series)
• ECM Technika (series)
• ECM Synchronika
• ECM Classika
• ECM Giotto
• Profitec Pro 400
• Profitec Pro 500
• Profitec Pro 600
• Profitec Pro 700
• Profitec Drive

When to Service Your E61 Group Head

• Group seal leaking water around the portafilter during extraction
• Portafilter difficult to lock in or lock-in point has moved significantly
• Shower screen discoloured, blocked, or damaged
• Machine due for routine service (recommended every 6–12 months)

Installation Video

Watch our step-by-step guide on servicing the E61 group head on your ECM or Profitec espresso machine:

Watch: ECM E61 Group Head Service Guide on YouTube ▶

Frequently Asked Questions

What is the paper spacer used for?

The 0.5mm paper spacer is placed behind the group seal to fine-tune the depth at which the portafilter locks in. It is used when the portafilter lock-in point is slightly off after fitting a new seal, allowing the position to be adjusted without replacing additional components.

Why use a silicone group seal instead of rubber?

Silicone seals are more heat-resistant and longer-lasting than standard rubber seals. They maintain their shape and sealing properties at high boiler temperatures and tend to last longer between service intervals.

How often should I replace the E61 group seal?

For home use, the E61 group seal is typically replaced every 6 to 12 months depending on usage, or whenever the portafilter begins to leak during extraction or the lock-in point changes noticeably.